How to Maintain a Flute – A&G Central Music Hold the flute’s body where there are no keys, and carefully twist the head joint into position. Align the tone hole in the head joint with the body keys. Twist the foot joint into place with care. The body’s keys must align with the rod on the foot joint.
The pieces of the flute are designed to fit without the need of oil. If you are having trouble assembling the components, clean them. After each and every performance, wipe your flute. Take apart your flute. Thread a tiny piece of lint-free fabric (a gentleman’s handkerchief works well) through the cleaning rod’s slot.
Be sure to tuck the end of the cleaning rod into the cloth so that the metal rod does not damage the flute as it is pushed through the instrument. If you leave moisture in the flute, the pads will degrade. Always store your flute in its case while it is not in use.
Papers and music can cause the rods and keys to bend if they are placed in a casing that was not meant to retain them. Avoid polishing the keys. After playing, remove sweat and fingerprints with a soft towel. Never use silver polish or any other type of cleaning on the flute. Use “saliva” or rubbing alcohol on a cloth to clean your flute.
To maintain clean pads, avoid eating sweets and gum before and during play. Do not allow anyone else play your instrument. The flute is a fragile instrument that requires cautious handling. If you must set it down during class, place the keys facing up on a level surface.
Never rest a flute on a music stand. Be cautious not to knock or bump the flute while playing, as it is quickly dented and these dents are difficult and expensive to repair. DO NOT tweak or twist the cork button on the head joint. This button has been factory-adjusted to alter the instrument’s overall pitch.
If you have any questions or concerns, please contact your instructor. Flute, in good working order Cleaning rod and fabric (handkerchief is best). How to Maintain Your Flute – A&G Central Music
How can I clean and disinfect an old flute?
Cleaning the Joint of the Flute Head – Using a cotton swab soaked in denatured isopropyl alcohol, thoroughly clean the area surrounding the embouchure hole. The lip plate may be disinfected using alcohol wipes if the flute is shared by many players. Cleanse the interior of the headjoint by inserting a soft, lint-free silk cloth into the cleaning rod.
What Happens if Your Flute Is Not Cleaned? You may agree that cleaning your flute is really essential, but you may also wonder what would happen if you didn’t clean it at all. Fortunately, the answer is rather straightforward. Although tarnish doesn’t do much damage to your flute other than slowly degrading the silver, rust and key jamming are extremely typical outcomes of not properly cleaning the instrument.
If your instrument’s keys get jammed and unusable, you may no longer be able to play it. Similarly, if your instrument develops rust, it may erode the silver to the point where holes occur, rendering the instrument completely worthless. Therefore, it is in your best interest to maintain your instrument in order to increase its longevity and sound quality.
In addition, failure to clean your flute can result in bacterial development and water damage, which can make you sick and lead to further rusting. Your breath contains several microorganisms as well as water, both of which can harm and eventually deform your instrument.
Why is my flute stinking?
– Article by Fox » Sat May 29, 2010 7:40 am Um. saliva is typically the culprit when my headjoint begins to smell funny. Typically, I place the case in a secure location and allow it to air out. If the odor is caused by humidity, this might not be very helpful. fluttiegurl Posts: 882 Friday, December 10, 2004 11:05 p.m.
His 15-year cough disappeared only when his instrument was thoroughly sanitized. As a result, a colorful palette of germs, fungi, and yeasts thrive on the mouthpieces of all types of wind instruments, which “may increase the risk of diseases if not consistently cleaned.”
What type of fabric is used to clean a flute?
How should the inside of the flute be cleaned? Standard cleaning tools include a pull-through flute swab or a cleaning rod with a lint-free material such as silk, microfiber, or jersey. Typically, the cleaning rods feature a cork depth marker on the end for adjusting purposes.
A plastic rod is less likely than a metal rod to scratch the inside. There is also a device called Pad Savers that is stored within the flute and is supposed to keep moisture and dust away from the pads, hence extending their lifespan. When storing a flute, the instrument is often wiped down first, then the pad saver is placed inside.
Some players I know swab the pad saver and then dry it with a towel before reinserting it. How should the inside of the flute be cleaned?
The lip plate may be disinfected using alcohol wipes if the flute is shared by many players. Cleanse the interior of the headjoint by inserting a soft, lint-free silk cloth into the cleaning rod. Do not submerge the headjoint in water, since this might saturate and eventually shrink the cork.
- Scrubbing Bocal Every month, bocals must be cleaned using a bocal brush, a light soap solution, and running water.
- Bocals for the English Horn may be cleaned with a pipe cleaner, a light detergent solution, and running water.
- Be cautious not to scrape the interior of the bocal with the pipe cleaner’s exposed wire ends.
Hard Rubber and Ebony Mouthpieces Should Be Cleaned After each usage, mouthpieces should be swabbed and cleaned regularly. Choose a small container that can hold the mouthpiece upright, then insert the mouthpiece inside the container with its tip facing downward.
- Fill the container with a solution of 50% water and 50% white vinegar or hydrogen peroxide till the window of the mouthpiece.
- Protect the corked tenons of clarinet mouthpieces against dampness.
- After soaking the mouthpiece for fifteen minutes, use a mouthpiece brush of the proper size to remove any calcium deposits or other debris from the inner and outer surfaces.
If the mouthpiece is significantly soiled, this process may need to be repeated. After a thorough rinsing, soak the mouthpiece with disinfection solution. Wait one minute before placing on a paper towel. Use a paper towel to dry the surface. Metal saxophone mouthpieces are easily cleaned with hot water, dish soap (not dishwashing detergent), and a mouthpiece brush.
- Additionally, disinfectant solution is suitable for metal mouthpieces.
- Necks of Saxophones that need Maintenance There are swabs available for cleaning the interior of the saxophone’s neck.
- However, many saxophonists achieve the same effects with a flexible bottlebrush and toothbrush.
- The neck of the saxophone should be wiped down after each usage and cleaned regularly.
Use the bottlebrush and mildly soapy water to clean the interior of the bottle’s neck. Rinse under running water. If desired, a disinfectant solution may be applied to the inside of the neck. Place on a paper towel for 60 seconds. Rinse under running water one more, pat dry, and place in the case.
- Mouthpieces of Brass Instruments are Cleaned.
- Monthly cleaning should be performed on mouthpieces.
- Use a towel dipped in warm, soapy water to wipe the mouthpiece’s outside.
- Brush the interior of the mouthpiece with warm, soapy water and a toothbrush.
- Rinse and thoroughly dry the mouthpiece.
- At this point, a disinfectant solution may be applied to the mouthpiece.
Place on a paper towel for 60 seconds. Use a paper towel to dry the surface. Purifying Stringed Instruments Above 70% isopropyl alcohol should only be used to the strings and unfinished finger and fret boards. String, percussion, and keyboard instruments have less hygiene difficulties that may be resolved by washing hands for at least 20 seconds before and after usage.
Other Instruments Plastic recorders may be cleaned with warm, soapy water with a plastic cleaning rod and soft, thin cloth after every use. Additionally, disinfectant solution and alcohol wipes can be employed. Selecting a Cleanser for Musical Instruments It is safe to use Sterisol Germicide Solution on plastics, hard rubbers, and metals.
Mi-T-Mist Mouthpiece Cleaner is compatible with the majority of materials. It is NOT advised for use with mouthpieces made of hard rubber. Alcohol wipes are safe for the majority of materials. They are NOT advised for use with mouthpieces made of hard rubber.
- On plastics, hard rubbers, and metals, a solution composed of 50% water and 50% white vinegar or 50% water and 50% hydrogen peroxide can be used safely.
- Although other possible disinfectants, such as alcohol, boiling water, and bleach, can be used as general disinfectants, it is not advised that they be used on mouthpieces or instruments owing to their potential effect on skin, plastics, and metals.
No matter whatever disinfectants are used, it is essential to carefully read and adhere to the product instructions. Mouthpieces and equipment must be meticulously cleaned prior to use since disinfectants do not eliminate grime. Here you may discover COVID-19 disinfectants certified by the EPA.